Fumes are emitted into the air during many different applications, even more so within a laboratory. When these particles are emitted into the air there is a high possibility that they can be inhaled by those working in the laboratory, and should these particles be poisonous or even carcinogenic, depending on the material is being worked on, this can create a serious health issue for the lab technician. Strict regulations have been put in place to ensure that the health of those working within the laboratory comes first, and through the installing of fume extractors, the inhalation of these fumes is limited.
Fume extractors are placed in strategic parts of the lab to ensure that fumes emitted into the air do not affect the lab technician’s health. At source extraction units ensure that the fumes are collected as soon as they become airborne managing the amount of fumes in the air.
Envirox recommends the Nederman Bench Top FX2 extraction arm range as a solution to extract the fume emissions during certain applications. Supplied by Envirox, these quality bench top extraction arms are small, flexible and easy-to-use and are installed in the labs to extract contaminants such as solvents, or to extract airborne contaminants emitted during applications such as soldering. When soldering occurs lead-tin solder alloy is used as a filler metal. However, oxide fumes are generated when heat is applied to the alloy which when inhaled can cause symptoms such as loss of appetite, indigestion, nausea and headaches. By installing an FX2 bench arm the benefits include a safer and cleaner working environment which in turn will reduce health risks.
Nederman FX2 range
This range of fume extractors is available in different lengths and sizes which can be attached to the wall or ceiling or mounted to the table and is supplied with mini hoods which can customised to suit the needs of the laboratory. The hoods available are the ergonomically designed combi-hood, the dome hood, the flange hood and the metal hood. These can be attached directly to the mini hood, irrespective of the arm size. The FX2 range includes three different models to suit specific needs.
- The original model can be used for general applications where there is little risk of electrical discharge or corrosive contaminant.
- The ESD/EX model is used where static electricity and sparks need to be avoided
- The CHEM model is ideal for extracting corrosive contaminants.
Envirox, supplier of Nederman quality fume and dust extractors, including the FX2 range, is available to provide solutions for all applications, including those in a laboratory, that will assist with the extraction of dangerous emitted fumes.
